What Is the Cheapest Way to Resurface a Pool in Gretna?
Written by Big Easy Pool Designs
Key Takeaways
- Paint is the cheapest way to resurface a concrete or fiberglass pool on the invoice, and HomeGuide and HomeAdvisor both rank it lowest.
- Paint also has the shortest life, at 5 to 7 years in HomeGuide’s guide, so it can take 3 or 4 jobs to cover 20 years.
- HomeGuide (2025) and HomeAdvisor (2026) both report a typical national resurface at $6,000 to $15,000. That’s a general market range, not a quote.
- Vinyl pools can’t be resurfaced in the usual sense. The liner gets replaced instead.
- A fair quote states the measured surface area, the finish, the prep, and the drain and refill as separate items.
- Big Easy Pool Designs gives written estimates after a free consultation. Call (504) 688-4066.
What Is the Cheapest Way to Resurface a Pool in Gretna?
Quick Answer: The cheapest way to resurface a pool in Gretna is usually epoxy or rubberized pool paint, which national cost guides rank as the lowest-priced finish. It’s also the shortest-lived, so the lowest price today isn’t always the lowest cost over the years you own the pool.
We tell Gretna homeowners to ask two questions before picking a finish: what does it cost this time, and how many times will I pay for it? Those answers often point in different directions, and the second one tends to get skipped when a quote is the only thing on the table.
What Should a Pool Resurface Cost?
National guides give a general market range. HomeGuide (2025) puts a resurface at $6,000 to $15,000 on average, with a national average of $11,000, and HomeAdvisor (2026) reports the same $6,000 to $15,000 normal range, with most homeowners paying about $11,000. Those aren’t Gretna quotes, since your pool’s measurements and condition set the real price. The biggest driver is surface area, and both guides price finishes by the square foot of surface, not by the size of the water.
That number is easy to estimate yourself. Add the floor area to the perimeter times the average depth. Here’s a rough example, using a 5 foot average depth:
- 12×24 pool: 288 square feet of floor plus 72 feet of perimeter times 5 feet of depth, or about 650 square feet.
- 16×32 pool: 512 square feet of floor plus 96 feet of perimeter times 5 feet of depth, or about 990 square feet.
So the larger pool has about 1.8 times the water area and about 1.5 times the surface. That’s our own arithmetic on a simple rectangle, and steps, benches, and a sloped floor will change it. Ask any estimator to state the square footage they measured, because two quotes built on different numbers can’t be compared. A written estimate for your own pool is the number to plan around.
How Do the Finishes Compare on Price and Lifespan?
Here’s how HomeGuide’s 2025 guide ranks them for a 1,000 square foot surface, from lowest price to highest, as national figures with the lifespan it gives where it lists one:
- Paint: $1,000 to $2,000, lasting 5 to 7 years.
- Standard plaster: $6,000 to $8,000, lasting 7 to 12 years.
- Quartz plaster: $7,000 to $10,000, lasting 10 to 15 years.
- Pebble: $7,000 to $15,000, lasting 15 to 20 or more years.
- Tile: $8,000 to $30,000 or more, the costliest and most labor-heavy route, and also easy to spot repair, since single tiles can be replaced.
HomeAdvisor’s 2026 guide puts the finishes in the same basic order, with paint lowest and tile highest, though its figures differ: about $1,500 for paint and about $5,500 for plaster per 1,000 square feet. It warns that paint wears down and needs frequent repainting. It also says plaster can crack and stain, while aggregate and pebble are more durable and cost more.
Which Finish Is Actually Cheapest Over Time?
Count the jobs. Here’s how many times each finish would go on across 20 years, using HomeGuide’s lifespans. It’s our own arithmetic, and it stays rough on purpose:
- Paint: 3 to 4 jobs.
- Standard plaster: 2 to 3 jobs.
- Quartz plaster: about 2 jobs.
- Pebble: 1 to 2 jobs.
Every one of those jobs brings another drain, another cleaning, and another refill, and that overhead doesn’t get smaller because the finish was inexpensive. HomeGuide (2025) puts draining and cleaning at $600 to $650, a garden hose refill at $40 to $400, and water delivery at $400 to $2,000. Paint can still win on total spend, so run your own quotes through this count before deciding. Pool paint also has to match what’s already there, since epoxy and rubberized paints won’t bond to each other.
There’s a local wrinkle too. Long swim seasons, hard sun, and heavy rain cycles wear finishes faster here than in milder climates, so we’d read those lifespans as a best case for a Gretna pool.
Does the Cheapest Option Depend on Your Pool Type?
Yes, because not every finish goes on every shell.
- Concrete or gunite: HomeGuide (2025) lists $6,000 to $15,000. Plaster, aggregate, and pebble are the usual choices, and it says the old surface has to be blasted or etched first.
- Fiberglass: HomeGuide (2025) lists $7,000 to $15,000. The original gelcoat is factory-applied, so the shell gets sanded and coated with a different finish.
- Vinyl: a new liner replaces resurfacing, at $3,000 to $7,500 for an inground pool in HomeGuide’s 2025 figures, the lowest-priced route of the three.
Not sure what you have? Our guide to gunite, fiberglass, and vinyl liner pools in Louisiana explains how to tell them apart and how each one ages.
What Can Make a Cheap Resurface Expensive?
When we look at an old pool, the finish is rarely the only question. A few things can turn a low quote into a bigger bill:
- Cracks and leaks. HomeGuide notes that cracks should be fixed before resurfacing, or they can spread and damage the new finish. If you suspect water loss, our post on telling a leak from evaporation is a good first step.
- Custom finishes. Pigmented plaster and decorative tile inserts add cost.
- Bigger problems underneath. A cracked shell or failing equipment is renovation work, and paint won’t solve it. Our breakdown of what drives pool renovation cost covers that side.
Licensing can matter here as well. The Louisiana State Licensing Board for Contractors requires a license with the Residential Swimming Pools classification when the work is valued over $7,500, per its site as of 2026, and the board offers a public lookup, so check before you sign anything.
What Should a Gretna Resurfacing Quote Include?
Ask for these in writing, so you’re comparing the same job:
- The surface area measured and the finish named.
- Surface prep, plus any crack or tile repairs.
- Draining, cleaning, and how the pool gets refilled.
- Who decides when it’s safe to drain.
That last line matters on our ground. Every finish on this list starts with an empty pool, and Gretna sits low on the West Bank, like most of the metro, with a high water table. Swim University, a pool care publisher, warns that a fully drained inground pool in a high water table can be pushed up out of the ground, whatever it’s built from. Treat draining as a job for someone who has checked the conditions at your address, especially after heavy rain.
Timing is worth a thought too. The Atlantic hurricane season runs June 1 to November 30, per the National Hurricane Center, so talk through the weather window before the water comes out.
For permits, the City of Gretna has its own Building Department, and that’s the office to ask about an address inside city limits. We handle City of Gretna permitting on the projects we build. Our Gretna pool remodel page explains how that work starts.
Frequently Asked Questions
Is painting a pool a bad idea?
Not always. It can make sense when you’re holding a pool together for a few years or planning a bigger remodel later. It’s a weaker fit if you plan to stay and don’t want to repeat the job.
What’s the most common finish for a concrete pool?
Plaster is the traditional one. HomeGuide notes that most concrete pools were originally finished with it, and our pool remodel service covers new plaster or aggregate over a sound shell.
Is resurfacing cheaper than remodeling?
Resurfacing is usually one part of a remodel. Our post on when resurfacing pays off walks through where it fits, and remodel or build new compares the bigger choice.
Get a Real Number for Your Gretna Pool
We’ll look at the pool, confirm the shell is sound, and put the scope and price in writing before anything changes.
See our Gretna service area, then request your free consultation or call (504) 688-4066.
More from the blog
How Many Types of Swimming Pools Are There? A Covington Guide
How many types of swimming pools there are, the three inground build types, 8 pool styles and which…
Buying a Home With a Pool in Covington: What to Check Before Closing
A pool can be an asset or a repair bill. What Covington home buyers should check before closing,…